diff --git a/cores/arduino/WVariant.h b/cores/arduino/WVariant.h
index 851c7ba717fda887adc86d02d00a046485b66a9d..2a05298d6d92afc99bae013f4b829f9d1fb3daf6 100644
--- a/cores/arduino/WVariant.h
+++ b/cores/arduino/WVariant.h
@@ -32,20 +32,26 @@ typedef enum _EAnalogChannel
typedef enum _ETCChannel
{
NOT_ON_TIMER=-1,
- TC3_CH0,
- TC3_CH1,
- TCC0_CH0,
- TCC0_CH1,
- TCC0_CH4,
- TCC0_CH5,
- TCC0_CH6,
- TCC0_CH7,
- TCC1_CH0,
- TCC1_CH1,
- TCC2_CH0,
- TCC2_CH1
+ TC3_CH0 = (3<<8)|(0),
+ TC3_CH1 = (3<<8)|(1),
+ TCC0_CH0 = (0<<8)|(0),
+ TCC0_CH1 = (0<<8)|(1),
+ TCC0_CH4 = (0<<8)|(4),
+ TCC0_CH5 = (0<<8)|(5),
+ TCC0_CH6 = (0<<8)|(6),
+ TCC0_CH7 = (0<<8)|(7),
+ TCC1_CH0 = (1<<8)|(0),
+ TCC1_CH1 = (1<<8)|(1),
+ TCC2_CH0 = (2<<8)|(0),
+ TCC2_CH1 = (2<<8)|(1)
} ETCChannel ;
+extern const void* g_apTCInstances[TCC_INST_NUM+TC_INST_NUM] ;
+
+#define GetTCNumber( x ) ( (x) >> 8 )
+#define GetTCChannelNumber( x ) ( (x) && 0xff )
+#define GetTC( x ) ( g_apTCInstances[(x) >> 8] )
+
// Definitions for PWM channels
typedef enum _EPWMChannel
{
diff --git a/cores/arduino/wiring_analog.c b/cores/arduino/wiring_analog.c
index 7094cb615767ddfebd4c7b0c528d6f27e8bd34f7..82ec417ec5e3d478f8fa9c2d6e0ca25eac43acb2 100644
--- a/cores/arduino/wiring_analog.c
+++ b/cores/arduino/wiring_analog.c
@@ -26,13 +26,13 @@ extern "C" {
uint32_t analogRead( uint32_t ulPin )
{
uint32_t ulValue = 0 ;
+/*
uint32_t ulChannel ;
ulChannel = g_APinDescription[ulPin].ulADCChannelNumber ;
static uint32_t latestSelectedChannel = -1;
-/*
switch ( g_APinDescription[ulPin].ulAnalogChannel )
{
// Handling ADC 12 bits channels
@@ -61,7 +61,7 @@ uint32_t analogRead( uint32_t ulPin )
void analogWrite( uint32_t ulPin, uint32_t ulValue )
{
uint32_t attr = g_APinDescription[ulPin].ulPinAttribute ;
- uint32_t pwm_name = g_APinDescription[ulPin].ulTCChannel ;
+// uint32_t pwm_name = g_APinDescription[ulPin].ulTCChannel ;
uint8_t isTC = 0 ;
uint8_t Channelx ;
Tc* TCx ;
@@ -122,6 +122,19 @@ void analogWrite( uint32_t ulPin, uint32_t ulValue )
pinPeripheral( ulPin, g_APinDescription[ulPin].ulPinType ) ;
}
+ Channelx = GetTCChannelNumber( g_APinDescription[ulPin].ulPWMChannel ) ;
+ if ( GetTCChannelNumber( g_APinDescription[ulPin].ulPWMChannel ) >= TCC_INST_NUM )
+ {
+ isTC = 1 ;
+ TCx = (Tc*) GetTC( g_APinDescription[ulPin].ulPWMChannel ) ;
+ }
+ else
+ {
+ isTC = 0 ;
+ TCCx = (Tcc*) GetTC( g_APinDescription[ulPin].ulPWMChannel ) ;
+ }
+
+/*
switch ( g_APinDescription[ulPin].ulPWMChannel )
{
case PWM3_CH0 :
@@ -190,36 +203,45 @@ void analogWrite( uint32_t ulPin, uint32_t ulValue )
Channelx = 1;
break;
}
+*/
- // --Set PORT
+ // Enable clocks according to TCCx instance to use
+ switch ( GetTCNumber( g_APinDescription[ulPin].ulPWMChannel ) )
+ {
+ case 0: // TCC0
+ //Enable GCLK for TCC0 (timer counter input clock)
+ GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID( 0x1A )) ;
+ break ;
+
+ case 1: // TCC1
+ //Enable GCLK for TCC1 (timer counter input clock)
+ GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID( 0x1A )) ;
+ break ;
+
+ case 2: // TCC2
+ //Enable GCLK for TCC2 (timer counter input clock)
+ GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID( 0x1B )) ;
+ break ;
+
+ case 3: // TC3
+ //Enable GCLK for TC3 (timer counter input clock)
+ GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID( 0x1B ));
+ break ;
+
+ case 4: // TC4
+ //Enable GCLK for TC4 (timer counter input clock)
+ GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID( 0x1C ));
+ break ;
+
+ case 5: // TC5
+ //Enable GCLK for TC5 (timer counter input clock)
+ GCLK->CLKCTRL.reg = (uint16_t) (GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_ID( 0x1C )) ;
+ break ;
+ }
+ // Set PORT
if ( isTC )
{
- // -- Enable clocks according to TCCx instance to use
- switch ( (uint32_t)TCx )
- {
- case (uint32_t)TC3 :
- //Enable TCx Bus clock (Timer counter control clock)
- PM->APBCMASK.reg |= PM_APBCMASK_TC3;
- //Enable GCLK for TC3 (timer counter input clock)
- GCLK->CLKCTRL.reg = (uint16_t) ((GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | ( 0x1B << GCLK_CLKCTRL_ID_Pos)));
- break ;
-
- case (uint32_t) TC4 :
- //Enable TCx Bus clock (Timer counter control clock)
- PM->APBCMASK.reg |= PM_APBCMASK_TC4;
- //Enable GCLK for TC4 (timer counter input clock)
- GCLK->CLKCTRL.reg = (uint16_t) ((GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | ( 0x1C << GCLK_CLKCTRL_ID_Pos)));
- break ;
-
- case (uint32_t) TC5 :
- //Enable TCx Bus clock (Timer counter control clock)
- PM->APBCMASK.reg |= PM_APBCMASK_TC5;
- //Enable GCLK for TC5 (timer counter input clock)
- GCLK->CLKCTRL.reg = (uint16_t) ((GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | ( 0x1C << GCLK_CLKCTRL_ID_Pos)));
- break ;
- }
-
// -- Configure TC
//DISABLE TCx
TCx->COUNT8.CTRLA.reg &=~(TC_CTRLA_ENABLE);
@@ -233,35 +255,9 @@ void analogWrite( uint32_t ulPin, uint32_t ulValue )
TCx->COUNT8.PER.reg = 0xFF;
// Enable TCx
TCx->COUNT8.CTRLA.reg |= TC_CTRLA_ENABLE;
-
}
else
{
- // -- Enable clocks according to TCCx instance to use
- switch ( (uint32_t) TCCx )
- {
- case (uint32_t) TCC0 :
- //Enable TCC0 Bus clock (Timer counter control clock)
- PM->APBCMASK.reg |= PM_APBCMASK_TCC0;
- //Enable GCLK for TCC0 (timer counter input clock)
- GCLK->CLKCTRL.reg = (uint16_t) ((GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | ( 0x1A << GCLK_CLKCTRL_ID_Pos)));
- break;
-
- case (uint32_t) TCC1 :
- //Enable TCC1 Bus clock (Timer counter control clock)
- PM->APBCMASK.reg |= PM_APBCMASK_TCC1;
- //Enable GCLK for TCC1 (timer counter input clock)
- GCLK->CLKCTRL.reg = (uint16_t) ((GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | ( 0x1A << GCLK_CLKCTRL_ID_Pos)));
- break;
-
- case (uint32_t) TCC2 :
- //Enable TCC2 Bus clock (Timer counter control clock)
- PM->APBCMASK.reg |= PM_APBCMASK_TCC2;
- //Enable GCLK for TCC2 (timer counter input clock)
- GCLK->CLKCTRL.reg = (uint16_t) ((GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK0 | ( 0x1B << GCLK_CLKCTRL_ID_Pos)));
- break;
- }
-
// -- Configure TCC
//DISABLE TCCx
diff --git a/cores/validation/validation_core/test - Copy.cpp b/cores/validation/validation_core/test - Copy.cpp
deleted file mode 100644
index ac1e28d118977b68b6f0d2cfde6713da1873cb3a..0000000000000000000000000000000000000000
--- a/cores/validation/validation_core/test - Copy.cpp
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- Copyright (c) 2011 Arduino. All right reserved.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-*/
-
-#include "Arduino.h"
-
-void setup( void )
-{
- // Initialize the digital pin as an output.
- // Pin PIN_LED has a LED connected on most Arduino boards:
- //pinMode( PIN_LED, OUTPUT ) ;
- //digitalWrite( PIN_LED, LOW ) ;
-
- // Initialize the PIN_LED2 digital pin as an output.
- pinMode( PIN_LED2, OUTPUT ) ;
- digitalWrite( PIN_LED2, HIGH ) ;
-
- // Initialize the PIN_LED2 digital pin as an output.
- pinMode( PIN_LED3, OUTPUT ) ;
- digitalWrite( PIN_LED3, LOW ) ;
-
- // Initialize the PIN 2 digital pin as an input.
- pinMode( 2, INPUT ) ;
-
-//**********************************************
-// Clock output on pin 4 for measure
-
- pinPeripheral( 4, PIO_AC_CLK ) ; // Clock Gen 0
- pinPeripheral( 5, PIO_AC_CLK ) ; // Clock Gen 1
- pinPeripheral( 13, PIO_AC_CLK ) ; // Clock Gen 3
-
-//**********************************************
-
- Serial.begin( 115200 ) ;
-}
-
-static void led_step1( void )
-{
-// digitalWrite( PIN_LED, LOW ) ; // set the LED on
- digitalWrite( PIN_LED2, LOW ) ; // set the red LED off
- digitalWrite( PIN_LED3, HIGH ) ; // set the red LED off
-}
-
-static void led_step2( void )
-{
-// digitalWrite( PIN_LED, HIGH ) ; // set the LED off
- digitalWrite( PIN_LED2, HIGH ) ; // set the red LED on
- digitalWrite( PIN_LED3, LOW ) ; // set the red LED on
-}
-
-void loop( void )
-{
- volatile int pin_value=0 ;
-
- // Test digitalWrite
- led_step1() ;
- delay( 1000 ) ; // wait for a second
- led_step2() ;
- delay( 1000 ) ; // wait for a second
-
- // Test Serial output
- Serial.write( '-' ) ; // send a char
- Serial.write( "test1\n" ) ; // send a string
- Serial.write( "test2" ) ; // send another string
-
- // Test digitalRead: connect pin 2 to either GND or 3.3V. !!!! NOT on 5V pin !!!!
- pin_value=digitalRead( 2 ) ;
- Serial.write( "pin 2 value is " ) ;
- Serial.write( (pin_value == LOW)?"LOW\n":"HIGH\n" ) ;
- delay( 1000 ) ; // wait for a second
-
-
-/*
- Serial.print("Analog pins: ");
-
- for ( int i = A1 ; i <= A0+NUM_ANALOG_INPUTS ; i++ )
- {
- int a = analogRead(i);
- Serial.print(a, DEC);
- Serial.print(" ");
- }
- Serial.println();
- delay(100);
-*/
-
-}
diff --git a/cores/validation/validation_core/test.cpp b/cores/validation/validation_core/test.cpp
index 9202715c8464bc6e189fe3281bfc1df222635ded..cb41822042b3c3886d50affd6b5c7383990e8068 100644
--- a/cores/validation/validation_core/test.cpp
+++ b/cores/validation/validation_core/test.cpp
@@ -44,8 +44,7 @@ void setup( void )
pinPeripheral( 13, PIO_AC_CLK ) ; // Clock Gen 3
//**********************************************
-
- Serial.begin( 115200 ) ;
+ Serial5.begin( 115200 ) ; // Output to EDBG Virtual COM Port
}
static void led_step1( void )
@@ -62,63 +61,50 @@ static void led_step2( void )
digitalWrite( PIN_LED3, LOW ) ; // set the red LED on
}
-static void analog_write_step( void )
-{
- uint8_t duty_cycle ;
-
- // test PWM generation on all PWM pins (duty cycle from 0x00 to 0xFF)
- for( duty_cycle = 0x00 ; duty_cycle <= 0xFF ; duty_cycle++ )
- {
- analogWrite( 13, duty_cycle ) ;
- analogWrite( 12, duty_cycle ) ;
- analogWrite( 11, duty_cycle ) ;
- analogWrite( 10 ,duty_cycle ) ;
- analogWrite( 9, duty_cycle ) ;
- analogWrite( 8, duty_cycle ) ;
- analogWrite( 7, duty_cycle ) ;
- analogWrite( 6, duty_cycle ) ;
- analogWrite( 5, duty_cycle ) ;
- analogWrite( 4, duty_cycle ) ;
- analogWrite( 3, duty_cycle ) ;
-// analogWrite( 2, duty_cycle ) ;
-
- delay( 10 ) ;
- }
-}
-
void loop( void )
{
volatile int pin_value=0 ;
+ static volatile uint8_t duty_cycle=0 ;
// Test digitalWrite
led_step1() ;
- delay( 1000 ) ; // wait for a second
+ delay( 500 ) ; // wait for a second
led_step2() ;
- delay( 1000 ) ; // wait for a second
+ delay( 500 ) ; // wait for a second
// Test Serial output
- Serial.write( '-' ) ; // send a char
- Serial.write( "test1\n" ) ; // send a string
- Serial.write( "test2" ) ; // send another string
+ Serial5.write( '-' ) ; // send a char
+ Serial5.write( "test1\n" ) ; // send a string
+ Serial5.write( "test2" ) ; // send another string
// Test digitalRead: connect pin 2 to either GND or 3.3V. !!!! NOT on 5V pin !!!!
pin_value=digitalRead( 2 ) ;
- Serial.write( "pin 2 value is " ) ;
- Serial.write( (pin_value == LOW)?"LOW\n":"HIGH\n" ) ;
- delay( 1000 ) ; // wait for a second
-
- analog_write_step();
+ Serial5.write( "pin 2 value is " ) ;
+ Serial5.write( (pin_value == LOW)?"LOW\n":"HIGH\n" ) ;
+
+ duty_cycle+=8 ;//=(uint8_t)(millis() & 0xff) ;
+ analogWrite( 13, duty_cycle ) ;
+ analogWrite( 12, duty_cycle ) ;
+ analogWrite( 11, duty_cycle ) ;
+ analogWrite( 10 ,duty_cycle ) ;
+ analogWrite( 9, duty_cycle ) ;
+ analogWrite( 8, duty_cycle ) ;
+ analogWrite( 7, duty_cycle ) ;
+ analogWrite( 6, duty_cycle ) ;
+ analogWrite( 5, duty_cycle ) ;
+ analogWrite( 4, duty_cycle ) ;
+ analogWrite( 3, duty_cycle ) ;
/*
- Serial.print("Analog pins: ");
+ Serial5.print("Analog pins: ");
for ( int i = A1 ; i <= A0+NUM_ANALOG_INPUTS ; i++ )
{
int a = analogRead(i);
- Serial.print(a, DEC);
- Serial.print(" ");
+ Serial5.print(a, DEC);
+ Serial5.print(" ");
}
- Serial.println();
+ Serial5.println();
delay(100);
*/
}
diff --git a/variants/arduino_zero/variant.cpp b/variants/arduino_zero/variant.cpp
index 224f8851b692f75de4b6368de152d5c41b4dc7dd..8bf63478115a3b439c77fde598d3d26c290f4922 100644
--- a/variants/arduino_zero/variant.cpp
+++ b/variants/arduino_zero/variant.cpp
@@ -188,3 +188,5 @@ const PinDescription g_APinDescription[]=
{ PORTA, 6, PIO_PWM, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM), No_ADC_Channel, PWM1_CH0, NOT_ON_TIMER }, // Pin 8
{ PORTA, 7, PIO_PWM, (PIN_ATTR_DIGITAL|PIN_ATTR_PWM), No_ADC_Channel, PWM1_CH1, NOT_ON_TIMER }, // Pin 9
} ;
+
+const void* g_apTCInstances[TCC_INST_NUM+TC_INST_NUM]={ TCC0, TCC1, TCC2, TC3, TC4, TC5 } ;