Adding WiFi shield validation project

cores/validation/validation_shield_wifi/build_as6/test.atsln

+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Atmel Studio Solution File, Format Version 11.00
+Project("{E66E83B9-2572-4076-B26E-6BE79FF3018A}") = "test", "test.cppproj", "{B3F859AD-E162-4C2F-9684-EAC6932FEC80}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|ARM = Debug|ARM
+		Release|ARM = Release|ARM
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{B3F859AD-E162-4C2F-9684-EAC6932FEC80}.Debug|ARM.ActiveCfg = Debug|ARM
+		{B3F859AD-E162-4C2F-9684-EAC6932FEC80}.Debug|ARM.Build.0 = Debug|ARM
+		{B3F859AD-E162-4C2F-9684-EAC6932FEC80}.Release|ARM.ActiveCfg = Release|ARM
+		{B3F859AD-E162-4C2F-9684-EAC6932FEC80}.Release|ARM.Build.0 = Release|ARM
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

cores/validation/validation_shield_wifi/test.cpp

+/*
+ 
+ This example connects to an unencrypted Wifi network. 
+ Then it prints the  MAC address of the Wifi shield,
+ the IP address obtained, and other network details.
+
+ Circuit:
+ * WiFi shield attached
+ 
+ created 13 July 2010
+ by dlf (Metodo2 srl)
+ modified 31 May 2012
+ by Tom Igoe
+ */
+ #include "Arduino.h"
+ #include <SPI.h>
+ #include <WiFi.h>
+
+void printCurrentNet();
+void printWifiData();
+void httpRequest();
+
+char ssid[] = "AVRGUEST";     //  your network SSID (name) 
+char pass[] = "MicroController";  // your network password
+int status = WL_IDLE_STATUS;     // the Wifi radio's status
+
+WiFiClient client;
+
+void setup() {
+  WiFi = WiFiClass();
+  client = WiFiClient();
+
+//  SPI.begin();
+  //Initialize Serial5 and wait for port to open:
+  Serial5.begin(9600); 
+  while (!Serial5) {
+    ; // wait for Serial5 port to connect. Needed for Leonardo only
+  }
+  
+  // check for the presence of the shield:
+  if (WiFi.status() == WL_NO_SHIELD) {
+    Serial5.println("WiFi shield not present"); 
+    // don't continue:
+    while(true);
+  } 
+  
+ // attempt to connect to Wifi network:
+  while ( status != WL_CONNECTED) { 
+    Serial5.print("Attempting to connect to WPA SSID: ");
+    Serial5.println(ssid);
+    // Connect to WPA/WPA2 network:    
+    status = WiFi.begin(ssid, pass);
+
+    // wait 10 seconds for connection:
+    delay(10000);
+  }
+   
+  // you're connected now, so print out the data:
+  Serial5.print("You're connected to the network");
+  printCurrentNet();
+  printWifiData();
+
+}
+
+void loop() {
+  // check the network connection once every 10 seconds:
+  delay(10000);
+  printCurrentNet();
+
+  // Trying to connect to http://hasthelargehadroncolliderdestroyedtheworldyet.com/
+  Serial5.println("Trying to connect to : www.hasthelargehadroncolliderdestroyedtheworldyet.com :");
+  httpRequest();
+  while( client.available() )
+  {
+    Serial5.print((char)(client.read()));
+  }
+  Serial5.println("END");
+}
+
+void printWifiData() {
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+    Serial5.print("IP Address: ");
+  Serial5.println(ip);
+  Serial5.println(ip);
+  
+  // print your MAC address:
+  byte mac[6];  
+  WiFi.macAddress(mac);
+  Serial5.print("MAC address: ");
+  Serial5.print(mac[5],HEX);
+  Serial5.print(":");
+  Serial5.print(mac[4],HEX);
+  Serial5.print(":");
+  Serial5.print(mac[3],HEX);
+  Serial5.print(":");
+  Serial5.print(mac[2],HEX);
+  Serial5.print(":");
+  Serial5.print(mac[1],HEX);
+  Serial5.print(":");
+  Serial5.println(mac[0],HEX);
+ 
+}
+
+void printCurrentNet() {
+  // print the SSID of the network you're attached to:
+  Serial5.print("SSID: ");
+  Serial5.println(WiFi.SSID());
+
+  // print the MAC address of the router you're attached to:
+  byte bssid[6];
+  WiFi.BSSID(bssid);    
+  Serial5.print("BSSID: ");
+  Serial5.print(bssid[5],HEX);
+  Serial5.print(":");
+  Serial5.print(bssid[4],HEX);
+  Serial5.print(":");
+  Serial5.print(bssid[3],HEX);
+  Serial5.print(":");
+  Serial5.print(bssid[2],HEX);
+  Serial5.print(":");
+  Serial5.print(bssid[1],HEX);
+  Serial5.print(":");
+  Serial5.println(bssid[0],HEX);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial5.print("signal strength (RSSI):");
+  Serial5.println(rssi);
+
+  // print the encryption type:
+  byte encryption = WiFi.encryptionType();
+  Serial5.print("Encryption Type:");
+  Serial5.println(encryption,HEX);
+  Serial5.println();
+}
+
+void httpRequest() {
+  // close any connection before send a new request.
+  // This will free the socket on the WiFi shield
+  client.stop();
+
+  // if there's a successful connection:
+  if (client.connect("www.hasthelargehadroncolliderdestroyedtheworldyet.com", 80)) {
+    Serial5.println("connecting...");
+    // send the HTTP PUT request:
+    client.println("GET / HTTP/1.1");
+    client.println("Host: www.hasthelargehadroncolliderdestroyedtheworldyet.com");
+    //client.println("User-Agent: ArduinoWiFi/1.1");
+    client.println("Connection: close");
+    client.println();
+
+    if( client.connected() )
+    {
+      Serial5.println("\tClient connected");
+      while( client.available() == 0 )
+      {
+        //Waiting for data
+        if( !client.connected() )
+        {
+          Serial5.println("\tClient disconnected !");
+          break;
+        }
+      }
+    }
+    else
+    {
+      Serial5.println("\tClient not connected");
+    }
+
+  }
+  else {
+    // if you couldn't make a connection:
+    Serial5.println("\tconnection failed");
+  }
+}